.png "Powered by vBulletin")
Hey, does anyone know if the Suzuki carbs on the carb bank the same? I have a bank of 4 carbs and 2 of them have stripped pilot jets. Someone is offering to sell me 2 carbs, I just need to know if the carbs in the bank are interchangeable.
-
Last edited by Peteortiz11; 06-15-2023, 08:37 PM.sigpicA distinguished Gentleman's ride
1981 Suzuki GS850gl, Café Racer!
Built, not Bought! -
Nope, each carb is distinct to it's position1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SES -
I recently had a similar problem, only it was stripped pilot air screws (three of them.) I drilled down into the screw, took a torx bit, and drove it into the hole using a hammer, then heated the carb body, with lots of PB Blaster on the screw, and it turned out no problem.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
Thanks so much for the info and advice. I will try the torx bit method and get back! Thx againsigpicA distinguished Gentleman's ride
1981 Suzuki GS850gl, Café Racer!
Built, not Bought!Comment
Comment