Announcement

Collapse
No announcement yet.

94 GSXR750 carbs....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    94 GSXR750 carbs....

    Hey guys,

    I got my hands on a set of low milage '94 GSXR750 carbs. I've sent them through my ultrasonic cleaner and reassembled them. They were off a wreck and had been sitting in a box in a warehouse complete with the motor and complete wiring harness....all for a couple hundred bucks.
    So my question is...would these carb reap me better performance gains on a 81 GS750 that I building for track days or would they be better on my 81 GS1100 for all around street performance?

    #2
    Think they are too big for a 750. They are 38mm.
    Probably too big for the 1100 aswell.
    Best ones you can use for the 1100 are the BST36's of the oil cooled GSXR's.
    Even better when you optimize the flow by smooth out the transitions between the carb/inlet/head.
    "All out till you see God, then brake" (Kevin Schwantz)

    GSXR1000K1 - Katana GSX1216SR Turbo - 2x Katana GSX1100SZ - Katana GSX750S - Harris Magnum2 GS1000 - Harris Magnum4 GSX-R1201 - Nico Bakker GS1085 - JMC GSXR1216 - MotoMartin GSX1100 - UPSSR750R - GSXR1216M - GSXR1255J Yoshimura - GSXR1100J - GSXR1100W - GSX1260ET - 2x GSX1100ET - 3x GSX1100EF - 2x GS1000SN - GS1000ET Wil Hartog - GS1000E - GS1000C - GS750R - GSX1100F - KTM1190 Adventure​

    Comment


      #3
      Thanks Jero!! Much appreciated

      Comment

      Working...
      X