Anybody know if I can replace the petcock vacuum hose (normally 4.5mm ID I believe) with some stock 5/32" vacuum hose at Autozone? ID is a little smaller but think it may work. Next size is 7/32"... not sure why they don't have 3/16"
-
-
It's available on Ebay. But to answer your question yes or, get some Tygon instead. It's the fuel line used on gas trimmers.Current:
1993 ZX11 - 2nd build in progress
1977 GS750 (710 is getting closer)
1998 Kawasaki Voyager - selling
1998 Chevy C2500
1999 Rav4 -
Whynot just get OEM vacuum hose. For less than $20 you can get a lifetime supply!Ron
'78 GS1000E, '79 GS850G, '82 GS1100E, 2022 Triumph Tiger 660 SportComment
-
I'd say if you can get it on securely on both ends and it's a reasonably thick-walled hose it will be fine, it's only vacuum and not a lot of it. I have grabbed whatever fits, like some spare fuel line which is pretty stout and never had any issues.Last edited by oldGSfan; 09-05-2024, 08:52 AM.Tom
'82 GS1100E Mr. Turbo
'79 GS100E
Other non Suzuki bikesComment
-
Comment
-
I've been thinking what Tom said. Anything that will seal at the ends should work1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100Comment
Comment