Replace Diaphragms GS1000gt

[ironbiker]

Waiting for parts,just getting rubber portions,watched YouTube,any suggestions?

[Nessism]

Capture.png
When I did it, I bent up the lip on the slide that holds the plastic retainer disc, very carefully, until the retainer could be removed. Then the diaphragm could be removed. To bend the lip back down, I used a plastic rod and a hammer, and smashed it all back down. When you do this, a fair bit of the aluminum lip will get damaged. There still should be enough to get the job done, though, but you only get one chance.