1982 Gs650E Runaway Throttle at Idle

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • EmmCee
    Forum Newbie
    • Jan 2025
    • 17
    • Ventura, CA

    #1

    1982 Gs650E Runaway Throttle at Idle

    Alright, ive been over this motor with a fine toothed comb. I cant find anywhere that air would be getting in so im at a loss.

    I can get it to idle just fine, but the moment I blip the throttle, it runs away and redlines and I have to hit the kill switch.

    But when it happens when im riding, I can stuff my hand in the no-no square and fiddle with the idle speed screw and it'll drop down.

    Any ideas short of "*@%^$*@%^$*@%^$*@%^$ can it" will be considered.

    Video of the problem.

    Last edited by EmmCee; Yesterday, 10:49 PM.
  • Cipher
    Forum Sage
    • Mar 2016
    • 3136
    • Toronto Ontario

    #2
    Disconnect throttle cable at carbs
    test by actuating throttle at carb thus removing cable etc. from being a factor.
    1983 GS 550 LD
    2009 BMW K1300s

    Comment

    • EmmCee
      Forum Newbie
      • Jan 2025
      • 17
      • Ventura, CA

      #3
      Originally posted by Cipher
      Disconnect throttle cable at carbs test by actuating throttle at carb thus removing cable etc. from being a factor.
      Yup. Did that already. Cable snag has been ruled out.

      Comment

      • Nessism
        Forum LongTimer
        GSResource Superstar
        Past Site Supporter
        Super Site Supporter
        • Mar 2006
        • 35813
        • Torrance, CA

        #4
        Airleak. Check the Newbie Mistakes thread linked in my signature. If you can't see the link, turn on "view signatures" in your profile.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment

        • EmmCee
          Forum Newbie
          • Jan 2025
          • 17
          • Ventura, CA

          #5
          Originally posted by Nessism
          Airleak. Check the Newbie Mistakes thread linked in my signature. If you can't see the link, turn on "view signatures" in your profile.


          Ah yes, ive read through your list many times. The only things on there that I could see being the culprit would be the pod air filters, but im using good K&Ns that I modified for clearance for air passage. Unfortunately this bike was in very very bad disrepair when I resurrected it and the airbox was little more than paint and wishful thinking holding the rust together and the same went for the exhaust. But the pipes I made for it (if my math was correct when making the baffles) should have the same backpressure as the stock exhaust.

          Admittedly though, the carbs are still using stock jets.

          Comment

          • EmmCee
            Forum Newbie
            • Jan 2025
            • 17
            • Ventura, CA

            #6
            Update: Found the leak. And it's embarassing..

            Forgot to tighten down the intake boots all the way last time i pulled the carbs. At least i know now

            So future GS owners that happen to find this thread. Dont be like me. Tripple check your work

            Comment

            • Nessism
              Forum LongTimer
              GSResource Superstar
              Past Site Supporter
              Super Site Supporter
              • Mar 2006
              • 35813
              • Torrance, CA

              #7
              Originally posted by EmmCee

              Admittedly though, the carbs are still using stock jets.
              The bike won't run well with pods and the stock jetting. It will run hot, among other things.
              Ed

              To measure is to know.

              Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

              Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

              Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

              KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

              Comment

              • rphillips
                Forum Guru
                Past Site Supporter
                Super Site Supporter
                • Jun 2005
                • 7712
                • Norene TN

                #8
                Stock jets with pods???? Hard to imagine
                1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

                Comment

                Working...