What size jet kit?

[Demonthrall]

1982 GS550L needs a new jet kit. Stage 3 if possible? Several searches turn up nothing, except a kit for the 1982 GS550 Katana. Would this fit?

thanks in advance

[Billy Ricks]

Cross reference the two models here for jetting specs, http://www.thegsresources.com/_forum...+jetting+specs. If they are the same, which more than likely they are, then go from there. Most of the Dynojet kits contain jetting and info for Stage 1 and 3.

[Demonthrall]

Yes, I found that thread, but I can't find the corresponding dyno kit? Thanks for your help

[Billy Ricks]

Yes, I found that thread, but I can't find the corresponding dyno kit? Thanks for your help

If they share the same jetting stock then the Dynojet kit for one will work with the other.

[Demonthrall]

The idiot before me drilled the baffles and put pods on.

could I just purchase individual jets from Z1? If so how many points would I go up?

main jet: 80 (could I buy a 100?)
pilot: 15 (could I buy a 17.5?)
air jet: 1.4 (??)

[Billy Ricks]

The idiot before me drilled the baffles and put pods on.

could I just purchase individual jets from Z1? If so how many points would I go up?

main jet: 80 (could I buy a 100?)
pilot: 15 (could I buy a 17.5?)
air jet: 1.4 (??)

It's the slide needles you really need from the jet kit. The needles in the kits are slotted and have 5 or 6 positions for the clip. They have a completely different taper than stock. Do they share the same jet sizes stock?

[Demonthrall]

they do not share the same size. In fact, I'm getting conflicting info on which size my jets are. i have contacted a couple of companies, and no one carries a kit? can i find another kit?

I am more inclined to go by this:

http://www.thegsresources.com/_forum/showthread.php?t=73723&highlight=carb+jetting+specs&page=14

[Demonthrall]

actually they do share the same size, I am a moron.