Air screw purpose
Collapse
X
-
Demonthrall
Air screw purpose
1982 GS 550L - When I tighten the air screws, does that make it leaner or richer? Also does this actually control the air or the fuel? thanks in advanceTags: None -
terrylee
That is the only screw on this year of bike. Turning right leans it and turn left riches. terrylee -
Guest
I call this the idle mixture screw. Fuel is pulled from the main jet and diverted to the pilot jet because the main is blocked by the jet needle.
Air from the pilot air jet (on the filter side of carb. the jet you can remove) mixes with the fuel and goes through the idle mixture screw. This is premixed (fuel/air). The screw controlls how much fuel/air is metered during idle.
They are set lean at the factory. I do the highest RPM method by setting each idle mixture screw so the engine idles the highest. (self explanatory)
You'll need an temp tank to do this and a long screwdriver. Get a sync tool and to your carbs while your at it.Comment
-
Demonthrall -
Guest
Comment
-
Demonthrall -
teddux
Comment
-
Guest
Comment
-
teddux
Comment
-
Guest -
teddux
Comment

Comment