Announcement

Collapse
No announcement yet.

77 gs 550 jetting?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    77 gs 550 jetting?

    Gonna run pod filters on the gs550, when i got it it had factory airbox but the rubber boots were all mismatched off of who knows what? How much do i have to jet up to run with stock exhaust? I may chop and remove the baffles as well or get some new exhaust tips that are plain and oppen.
    Also , i am dipping my carbs at the moment and the dip accumulates a film on top of it and gets thicker daily. Second day they have been in there and it is yamaha carb dip mixed two parts water one part dipping solution per the directions.

    #2
    I found a nylon jet kit. came with 6 different sized jets. from about 100 on up to i believe 122. Any good or bad things i should know about these nylon jets.

    Comment


      #3
      They are nylon.


      Life is too short to ride an L.

      Comment


        #4
        Is that necessarily bad? Its not an extreme load bearing jet. Ha, seriously though. I have never seen them in nylon and they are reasonable compared to the brass jet kits which i better get the correct size of because i only get one set.

        Comment

        Working...
        X