Replacement Diaphragm

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • PoppaDre

    #1

    Replacement Diaphragm

    I need to replace my cracked carb diaphragms. I have a 1981 Gs650 with the stock Mikuni carbs. Anyone know where i can find replacements. What other models/part numbers will fit? Thanks
  • BassCliff

    #2
    Hi,

    Here's one source:



    There are other vendors in your "mega-welcome". Just click my website link below and go to the READ ME page.


    Thank you for your indulgence,

    BassCliff

    Comment

    • tmacey45

      #3
      Hello, I looked up the part number for your diaphragm... #1350045110 You should be able to order them from most Suzuki dealers using this part number. Here is a link to a site that I used to look up parts, but I have never ordered anything from them. It's pretty easy to x-reference parts at this site too. Parts are broken down on a diagram along with the OEM part numbers so its simple to check parts that will interchange between models and even makes. Looks like BassCliff's link has the part you are looking for, and at a great price. Good luck... http://www.cmsnl.com/products/diaphragm_1350045110/
      Last edited by Guest; 05-03-2010, 11:51 PM.

      Comment

      • TheCafeKid

        #4
        Hello..I have a few.. $30 ea.. Let me know

        Comment

        • Guest

          #5
          I have some to but I'm too slow.

          Comment

          • ddaniels
            Forum Guru
            • Aug 2009
            • 5590
            • Dayton, OH

            #6
            Originally posted by chef1366
            I have some to but I'm too slow.
            heh heh That's funny right there...
            Current Bikes:
            2001 Yamaha FZ1 (bought same one back)

            Comment

            • Ahbra

              #7
              So back from the dead,
              I'm looking for a replacement diaphragm for a 83 gs550e.

              Only thing I've found is that the replacement is is like 80 - 130 bucks.
              I only need the rubber, not the slider.
              Last edited by Guest; 06-14-2011, 08:21 PM.

              Comment

              Working...