Looking for the vm carb T fitting

[00.]

I'm looking for the vm carb T fitting for the 1977-1979 gs1000, gs850, gs750 carburetors, The T fitting is the same for all these models. I checked on z1 enterprises and they have a reproducition t fiting since the original is not available anymore, but z1 enterprises it out of stock now and I would love to get my bike running as soon as possible, does anyone know where I can get this t fiting. I included a picture below. Thanks for any help on this.

[Nessism]

I've seen those on ebay before.

[Sandy]

These guys have them also.

http://www.siriusconinc.com/search_result.php?make=SUZUKI&model=gs1000&part=Carburetor Repair Kits&partno=&search=search&x=36&y=13&start=9

[Guest]

I've seen those on ebay before.

Yup, 20 bux..

I wrapped em in teflon tape to snug em up a bit.
Kept the 20 for beer..

[Nessism]

For a guy with a lathe and brazing torch making a Tee is a 1/2 hour project. I've made them before with the help of a machinest friend since I don't have a lathe anymore.

[00.]

Thanks for the info I just bought one from the serius place , yes they are pricey but I don't have a layth and I don't know about usuing teflon, I don't want it to brake off and plug some holes up, I just cleaned the damn thing and it started leaking for that pipe, the bike ran like a dream but leaked fuel like crazy. Thanks again.

[Guest]

I don't know about usuing teflon.

Me neither. Im just going with what others say.
We shall see..

[crapwacker]

t on ebay

Decent price http://cgi.ebay.com/ebaymotors/ws/eB...tchlink:top:en

[wkmpt]

Z1 enterprises evidently has them again.

http://www.thegsresources.com/_forum/showthread.php?t=160522