exhaust (ewwwww)

[shibby_cbs]

You talked to someone from Pepboys auto parts?
Maybe the Pepboys in your area is better than mine but odds are the person you talked to didnt even check to see what size pipes they had.

hah...naa im pretty sure he checked...he even decribed something he had that might work but i determined it wouldnt

[lord1234]

Welding shop should do the trick and have the right pipe laying around.

[koolaid_kid]

I suggest that you let us know where you are located. Click on User CP (upper left corner) then click on Edit Your Details. Scroll down to Additional Information and enter your location, then Save Changes. If we know where you are, we might be able to find a shop near you that can help.
Best of luck.

[Nessism]

Try another muffler shop, one not part of a chain. Any decent shop can make/tweak/bend/flare/somethingoranother to get you on the road. Unbelievable that the chain guys sent you away. Apparently, not enough profit in the job to make it worth their while.

[Joel750T]

Try showing up 5 minutes before closing time with a case of beer. Don't go in and talk to the manager, just walk to the shop doors, find the guy with the most grit on his clothes and ask if he likes free beer. I am 2 for 3 for easy custom fab stuff, though I must admit it was for my kids trampoline. If they shoot you down, consider it free beer for you, no harm, no foul

[shibby_cbs]

Try showing up 5 minutes before closing time with a case of beer. Don't go in and talk to the manager, just walk to the shop doors, find the guy with the most grit on his clothes and ask if he likes free beer. I am 2 for 3 for easy custom fab stuff, though I must admit it was for my kids trampoline. If they shoot you down, consider it free beer for you, no harm, no foul

Lol...you guys are awesome....but I finally found it....turns out the first guy i talked to at pepboys is dumb....called again to double check and what do ya know....they had it...good lord finally...but that was the easy part...now I need to work on getting the header bolts out that snapped off when removing the exhaust...ugh....gonna habe to pull the whole front end off just to get a good angle at em

[legaleli]

Lol...you guys are awesome....but I finally found it....turns out the first guy i talked to at pepboys is dumb....called again to double check and what do ya know....they had it...good lord finally...but that was the easy part...now I need to work on getting the header bolts out that snapped off when removing the exhaust...ugh....gonna habe to pull the whole front end off just to get a good angle at em

What kind of anti-seizing oil did you use before trying to loosen the bolts?

[shibby_cbs]

What kind of anti-seizing oil did you use before trying to loosen the bolts?

pb blaster...let em soak for about 20 min...i got 2 of 4 of the broken bolts out and tapped but one of the 2 left may be the death of my head...broke a drill bit off inside last night and i dont really know of anything that will drill through a drill bit

[legaleli]

pb blaster...let em soak for about 20 min...i got 2 of 4 of the broken bolts out and tapped but one of the 2 left may be the death of my head...broke a drill bit off inside last night and i dont really know of anything that will drill through a drill bit

1) PB Blaster is amazing - next time you run into a stuck bolt consider soaking for 3-4 days - it could help.
2) Try a harder drill bit

[shibby_cbs]

1) PB Blaster is amazing - next time you run into a stuck bolt consider soaking for 3-4 days - it could help.
2) Try a harder drill bit

any suggstions

[Guest]

Lol...you guys are awesome....but I finally found it....turns out the first guy i talked to at pepboys is dumb....called again to double check and what do ya know....they had it...good lord finally...but that was the easy part...now I need to work on getting the header bolts out that snapped off when removing the exhaust...ugh....gonna habe to pull the whole front end off just to get a good angle at em

I've never trusted the counter guy any of the min wage parts stores.

[Guest]

any suggstions

How many of em busted?

[shibby_cbs]

How many of em busted?

4 of the 8 busted...i was able to drill and tap 2 of them...the 3rd one i have yet to try and the 4th one has the drill bit broke off inside it...just got what the guys at home depot said was their hardest bit to try and drill through that old bit (rigid cold fire bit) and it dulled in about 2 seconds flat

[Guest]

4 of the 8 busted...i was able to drill and tap 2 of them...the 3rd one i have yet to try and the 4th one has the drill bit broke off inside it...just got what the guys at home depot said was their hardest bit to try and drill through that old bit (rigid cold fire bit) and it dulled in about 2 seconds flat

You've got your work cut out for ya dude. Do a search.. Lots and lots of info on this subject.
I busted a tap in one of mine. Used a center punch to bust it up peice by peice using a magnet to remove the bits untill the hole was clean.
PITA
Oh, and stop trusting the min wage idiots that work behind the counter.
Do your own research. You'll learn alot more because you're the one that made effort.

[shibby_cbs]

You've got your work cut out for ya dude. Do a search.. Lots and lots of info on this subject.
I busted a tap in one of mine. Used a center punch to bust it up peice by peice using a magnet to remove the bits untill the hole was clean.
PITA
Oh, and stop trusting the min wage idiots that work behind the counter.
Do your own research. You'll learn alot more because you're the one that made effort.

thanks....broke an impact screwdriver today on this thing...poor thing...lol...hit it so hard the balbearings flew out...i was like wtf...anyway looks like im gonna go to the hardware store tomorrow and just paroose the isles till i find somethin that may work...i think i just need to find the right drillbit...the biggest problem is its gotta be long enough