Petcock working?

[605Jake123]

Is there a way for me to tell if the petcock is working while not hooked up to the carbs? My carbs are getting worked on right now and i would like to make sure everything else working before they are done.

[Guest]

If you have a vacum type petcock you can put it in prime ad suck a bit on the vacum hos and gas should start to flow. Then put it in the on position and do the samme thing and you should get gas to come out that way too.

[Dogma]

Do like kparkfan says. The different setting should work like this:

Prime: Apply vacuum once and fuel should keep flowing.
Run: Fuel should flow only as long as vacuum is applied.
Reserve (if you have it): Same as run.

[SqDancerLynn1]

Prime will flow without any vacuum..

[FormerBMWguy]

Don't suck on the wrong hose.

[Nessism]

If the diaphragm fails fuel will go back down the vacuum line and into the carbs/engine. Using clear tubing will help you see if you are getting this reverse flow.

[605Jake123]

alright i'll give it a try today. thanks all for the help

[Dogma]

Prime will flow without any vacuum..

This must be another way the petcock on the '80 850GL is different. It needs the vacuum to get started.

[Guest]

This must be another way the petcock on the '80 850GL is different. It needs the vacuum to get started.

So does my 80 1100L