Announcement
				
					Collapse
				
			
		
	
		
			
				No announcement yet.
				
			
				
	
Fuel Line
				
					Collapse
				
			
		
	X
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
 Fuel LineI replaced my old fuel line from the tank to the carbs with a new piece of vinyl tubing (inside diameter of 1/4"). Unfortunately, I could only slide it over the first nipple of the carb settings and not both. I think it will be okay but I was hoping for some verification. Will it slide off and cause me issues or should I be okay?Cowboy Up or Quit. - Run Free Lou and Rest in Peace
 
 1981 GS550T - My First
 1981 GS550L - My Eldest Daughter's - Now Sold
 2007 GSF1250SA Bandit - My touring bike
 
 Sit tall in the saddle Hold your head up high
 Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
 and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"Tags: None
 
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 BassCliff BassCliff
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	Forum LongTimerGSResource Superstar
 Past Site Supporter
 Super Site Supporter- Mar 2006
- 36165
- Torrance, CA
 
 I don't think vinyl tubing is rated for gasoline.Ed
 
 To measure is to know.
 
 Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
 
 Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
 
 Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
 
 KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 TooManyToys TooManyToys
 Depends on what you have. The standard hardware store vinyl will have it's plasticizers leached out and get stiff and brittle. Tygon has a version that is amber in color and rated as fuel and lubricant. It works well and can be found at McMaster.
 
 I've seen the vinyl hose sold at bike shops as fuel line and it may be formulated for fuel, but I can't verify that.
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
 Based on what I read it was suitable but I'll run by Oreilly's tomorrow and get better stuff. Thanks.Cowboy Up or Quit. - Run Free Lou and Rest in Peace
 
 1981 GS550T - My First
 1981 GS550L - My Eldest Daughter's - Now Sold
 2007 GSF1250SA Bandit - My touring bike
 
 Sit tall in the saddle Hold your head up high
 Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
 and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 makenzie71 makenzie71
 Vinyl is like plastic...it's generic. There's a such thing as vinyl fuel line, but I don't like it...it tends to get brittle. Neoprene reigns supreme to me.
 
 And, if you can't get metric, get 5/16 and use hose clamps. 1/4" is a little tight...once the vinyl starts getting stiff it'll tend to crack.
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 Adler Adler
 brittle is ok, that just means replacement, I just dont want it to melt on me, or put harmful crap in my engine.
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 makenzie71 makenzie71
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 dcil dcil
 If you get it at a bike shop, make sure it wasn't manufactured around the same year your bike was. I bought some that lasted a couple weeks, then started splitting and screwed up a pair of nikes.
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 Adler Adler
 What do you guys reckon the vinyl tubing that comes with batteries is rated for? I slapped my leftovers from that into my moped.
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 081dbx64 081dbx64
 Here is a good source for metric fuel line..sold by foot. Kind of funny metric sold by foot!
 
 
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 TooManyToys TooManyToys
 But that cloth covered hose is larger in diameter then the stock hose. Often you can get that at VW repair shops.
 Comment
.png)
 
							
						

Comment