Announcement
				
					Collapse
				
			
		
	
		
			
				No announcement yet.
				
			
				
	
high idle?
				
					Collapse
				
			
		
	X
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 kildrm30 kildrm30
 high idle?ok finally got my charging problem fixed now i have a problem with my bike idling to high somtimes.i searched for an answer already.thought it was my orings or manifold leak but i sprayed solution around boots and it dont seem to be leaking.where else could my leak be coming from??its ridable as is but i like stuff to be right.motor was just rebuilt i sprayed the head gaskets and no leak there either.thank you guys for all your help.gonna get pics of my ride tommorow.oh yea 79 gs750.Tags: None
 
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 BassCliff BassCliff
 Hi,
 
 Spraying various and sundry liquids at your intake boots is not a reliable test. If they are 30 years old, it's time for new intake boots and O-rings. Have you checked things like cables, choke plungers, the idle adjustment screw, a well-sealed airbox, etc? Have the carbs been properly disassembled, dipped, and cleaned? There's lots of information about this stuff available on my website and by using the search function. Keep us informed.
 
 
 Thank you for your indulgence,
 
 BassCliff
 
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 kildrm30 kildrm30
 im running k/n pod filters on it.dont know if that has anything to do with it.i guess i will pull the carbs tommorow an see how o rings and boots are.awsome tech on your site.very very helpful.i will keep you posted
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 BassCliff BassCliff
 Hi,
 
 Have your carbs been re-jetted for the increased intake due to the pod filters? Do you also have an aftermarket 4-n-1 exhaust? A lean mixture is not good for your GS and other living things. 
 
 
 Thank you for your indulgence,
 
 BassCliff
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 kildrm30 kildrm30
 not sure about jetting.have stock exaust.i do have my stock airbox.it will rev up when cold then drop to normal idle kind of like the choke is on.then when i gas it it goes back up then drops back down.i unhooked the choke because it was going back down all the way.think i should put the stock air box on then go from there?
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
 Did PO or you have it rebuilt? As Basscliff said, those are probably old boots and o-rings - don't count on previous owner to have replaced them, or to have rejetted for pods.Originally posted by kildrm30 View Postnot sure about jetting.have stock exaust.i do have my stock airbox.it will rev up when cold then drop to normal idle kind of like the choke is on.then when i gas it it goes back up then drops back down.i unhooked the choke because it was going back down all the way.think i should put the stock air box on then go from there?1981 gs650L
 
 "We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	Forum LongTimerGSResource Superstar
 Past Site Supporter
 Super Site Supporter- Mar 2006
- 36165
- Torrance, CA
 
 Capitals and spaces after periods. It hurts my "experienced" eye's trying to read posts like this.Originally posted by kildrm30 View Postnot sure about jetting.have stock exaust.i do have my stock airbox.it will rev up when cold then drop to normal idle kind of like the choke is on.then when i gas it it goes back up then drops back down.i unhooked the choke because it was going back down all the way.think i should put the stock air box on then go from there?Ed
 
 To measure is to know.
 
 Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
 
 Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
 
 Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
 
 KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 kildrm30 kildrm30
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 kildrm30 kildrm30
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 BassCliff BassCliff
 Hi,Originally posted by kildrm30 View PostOk found the orings for sale here. What about carb boots from carb to head?
 
 There's an extensive vendor list in your "mega-welcome" along with a lot of other helpful information.
 
 The best price for intake boots (look on the page with the cylinder head, they're called intake "pipes") would probably be Partshark, Cycle Parts Nation, or G&S Suzuki.
 
 I did a price comparison recently in THIS THREAD.
 
 Thank you for your indulgence,
 
 BassCliff
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
 Yeah, here, too, but at least all the words had all their letters.Originally posted by Nessism View PostCapitals and spaces after periods. It hurts my "experienced" eye's trying to read posts like this. 
 
 .sigpic
 mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
 hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
 #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
 #2 son: 1980 GS1000G
 Family Portrait
 Siblings and Spouses
 Mom's first ride
 Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
 (Click on my username in the upper-left corner for e-mail info.)
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 kildrm30 kildrm30
.png)
Comment