intake boot o-rings

[Thenewguy]

Hello again. I have an 83 gs 750t. I need to replace the carb/engine intake boot o-rings. Does anyone have a part number? I looked all over the website and I cant find it. Any help would awesome. Thanks!

[JEEPRUSTY]

http://www.cycleorings.com/

go here email robert and get as good as stock far cheaper

[Dave8338]

As far as I know...you dont have any O-rings, there. Part of the boot itself.

[BassCliff]

Hi,

Indeed, order them from Rober Barr. For future reference, these parts, along with the intake boots, etc, can be located on the "cylinder head" pages of the parts fiches.

EDIT: Oops. Mr. Dave8338 is correct. Some of these GS bikes don't use separate O-rings on the intake boots.

You'll want #22 and #23 in this picture:



#22 is Part# 13111-45400. (2 req.)

#23 is Part# 13111-45400 (supersedes: 13121-45400). (2 req.)

Hmmm, looks like they're no longer using separate part numbers for "left" and "right". They're about $15 each at partshark.com.


You might want to pick up the clamps too (#24). Part# 09402-50306. (8 req.)


Thank you for your indulgence,

BassCliff

[JEEPRUSTY]

Hi,

Indeed, order them from Rober Barr. For future reference, these parts, along with the intake boots, etc, can be located on the "cylinder head" pages of the parts fiches.

EDIT: Oops. Mr. Dave8338 is correct. Some of these GS bikes don't use separate O-rings on the intake boots.


Thank you for your indulgence,

BassCliff

really eh?
so a slather of yamabond? suzukibond?

[tkent02]

Hose clamp.

[Dave8338]

really eh?
so a slather of yamabond? suzukibond?

New boots as they clamp to the carbs AND the head...

[BassCliff]

Hi,

See above. I looked it all up for Thenewguy.



Thank you for your indulgence,

BassCliff

[Thenewguy]

Thank you basscliff and everyone. I pulled the boots out this morning and its all one piece. I'm going to order the new ones today. Thanks!

[Redman]

New boots as they clamp to the carbs AND the head...

Hey!
Not only does boots for the T not have o-rings, they dont have the screws.
Oh, so not all GS owners have the fun expereince of trying to take out those screws.


Mr. Newguy,
Let us know how it goes.

.

[gearhead13]

Hey!
Not only does boots for the T not have o-rings, they dont have the screws.
Oh, so not all GS owners have the fun expereince of trying to take out those screws.


Mr. Newguy,
Let us know how it goes.

.

Is it just me or HUH??

[BassCliff]

Hi,

I'm sure Mr. Redman means these screws...




And I'll bet the vacuum port screws are in the head and not in the boots too.

Thank you for your indulgence,

BassClifif

[gearhead13]

Yup, never had a bike with those screws Why did Mr.Suzuki have to make them Phillips anyway
Guess thats why I didnt understand what he was getting at.