Announcement
				
					Collapse
				
			
		
	
		
			
				No announcement yet.
				
			
				
	
GS1100L intake boots
				
					Collapse
				
			
		
	X
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 ekim189 ekim189
 GS1100L intake bootsI went to clean the carbs on my 82 GS 1100 L and found the intake boots cracked and crumbling. When I go to replace these boots can I use used boots off a bike on here? (Anyone have a set they want to sell?) I am not sure if the boots need to be new to make sure they dont leak air ect? Thanks for your help!Tags: None
 
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 BassCliff BassCliff
 Hi,
 
 I know new boots can be a little pricey, about $20-$25 each depending on the vendor, but they will last another 25 years and make getting the carbs on and off soooo much easier. Order new clamps with the new boots as well as intake boot O-rings, if applicable. You won't regret it. I encourage you to fix it right the first time, then you'll never have to worry about it again.
 
 Sure, you can get used boots. But I wouldn't want anyone else to use the old boots I took off of my bike.
 
 
 Thank you for your indulgence,
 
 BassCliff
 
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 ekim189 ekim189
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	Forum LongTimerGSResource Superstar
 Past Site Supporter
 Super Site Supporter- Mar 2006
- 36165
- Torrance, CA
 
 Those boots are $26 here... http://www.partshark.com/fiche_secti...1980&fveh=2152
 
 Don't forget to order new O-rings to go with them.Ed
 
 To measure is to know.
 
 Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
 
 Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
 
 Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
 
 KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
 Comment
.png)
Comment