new guy with questions

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • atcrider1

    #1

    new guy with questions

    hey guys, i just got a 82 gs550l. what is the trick to getting the air box out? where can i get new carb boots?

    thanks
    cody
  • chuck hahn
    Forum LongTimer
    Past Site Supporter
    • May 2009
    • 25918
    • Norman, Oklahoma

    #2
    C4 and a long fuse..
    MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
    1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

    NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


    I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

    Comment

    • frozenfish66

      #3
      its a pain in the butt . the easyest way... if there is one is to remove the carburators and then pull it out or if you mean the air filter box then just remove the seat and pull it up and out when you have loosened everything there is enough wiggle room eventhough it may not look like it. depending on how hard your rubbers are it shouldnt bee too hard

      Comment

      • chuck hahn
        Forum LongTimer
        Past Site Supporter
        • May 2009
        • 25918
        • Norman, Oklahoma

        #4
        "its a pain in the butt"... hence my response about C4..not one bike i know of has an easy in..easy out airbox.
        MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
        1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

        NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


        I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

        Comment

        • BassCliff

          #5
          Greetings and Salutations!!

          Hi Mr. atcrider1,

          Yes, some of these GS bikes are a pain to get the carbs and airbox in and out. (My 850 is pretty dang easy.) Sometimes, after loosening the airbox, you can loosen the rear fender and then slide the aibox back another inch or so to facilitate easier removal of the carbs. Then the airbox should be much more cooperative.

          But that's not why I'm here. Let me dump a TON if information on you and share some GS lovin'.

          I just stopped by to welcome you to the forum in my own, special way.

          If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....

          Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", "Top 15 Tips For GS Happiness", the Carb Rebuild Series, and the Stator Papers. All of these tasks must be addressed in order to have a safe, reliable machine. Now let me roll out the welcome mat for you...



          Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

          Thanks for joining us. Keep us informed.

          Thank you for your indulgence,

          BassCliff

          Comment

          • chuck hahn
            Forum LongTimer
            Past Site Supporter
            • May 2009
            • 25918
            • Norman, Oklahoma

            #6
            Loosen the rear fender!! Now thats a freaking awesome idea Cliff! Not once had i thought of that . I can see that it adds a few inches of wiggle room..thanks for that post. Its gonna save me a lot of cuss words for sure!!
            MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
            1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

            NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


            I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

            Comment

            • Adler

              #7
              Originally posted by chuck hahn
              "its a pain in the butt"... hence my response about C4..not one bike i know of has an easy in..easy out airbox.
              I know the '78 750 has a piece-of-cake airbox, it just slides out. There are a few of them with that configuration.

              Comment

              • chuck hahn
                Forum LongTimer
                Past Site Supporter
                • May 2009
                • 25918
                • Norman, Oklahoma

                #8
                I got a 77 and a 78 750 Yeah they just slide out..long as you keep the snrokle from snagging on the wiring harness and frame, wiggle the top mounting brackets around the hard points on the frame.all the while unsnagging the boots from the intake sides of the carbs..yeah they just slide right out..easy peasy.
                MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
                1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

                NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


                I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

                Comment

                • Adler

                  #9
                  Originally posted by chuck hahn
                  I got a 77 and a 78 750 Yeah they just slide out..long as you keep the snrokle from snagging on the wiring harness and frame, wiggle the top mounting brackets around the hard points on the frame.all the while unsnagging the boots from the intake sides of the carbs..yeah they just slide right out..easy peasy.
                  Im glad we agree, .

                  Comment

                  • BassCliff

                    #10
                    Originally posted by chuck hahn
                    Loosen the rear fender!! Now thats a freaking awesome idea Cliff!
                    Hi,

                    I must admit it's not my original idea. I read where one of the real experts suggested that in a thread a few months ago. I thought it was very clever too. I'm just passing it along.



                    Thank you for your indulgence,

                    BassCliff

                    Comment

                    • Guest

                      #11
                      Originally posted by chuck hahn
                      "its a pain in the butt"... hence my response about C4..not one bike i know of has an easy in..easy out airbox.
                      Originally posted by chuck hahn
                      I got a 77 and a 78 750 Yeah they just slide out..long as you keep the snrokle from snagging on the wiring harness and frame, wiggle the top mounting brackets around the hard points on the frame.all the while unsnagging the boots from the intake sides of the carbs..yeah they just slide right out..easy peasy.
                      You're drinking again aint ya?

                      Comment

                      • chuck hahn
                        Forum LongTimer
                        Past Site Supporter
                        • May 2009
                        • 25918
                        • Norman, Oklahoma

                        #12
                        They put stuff in the water down here , Octain. I have taken the airboxes off more times than i can count and i can do it in about 5 minutes now.. but at first you dont know what all it snags on or the tricks of the trade..so as a nebie it isnt so easy. Now is it?
                        MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
                        1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

                        NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


                        I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

                        Comment

                        • atcrider1

                          #13
                          thanks for the tips and welcomes guys, i got it off it was a pita lol

                          Comment

                          • Guest

                            #14
                            Originally posted by chuck hahn
                            "its a pain in the butt"... hence my response about C4..not one bike i know of has an easy in..easy out airbox.
                            You have not tried a GS1000G or an 850 G then the two easiest air boxes that I've seen. I can remove the airbox and carbs on my 1000 in about 10 min's and install in about the same.

                            Comment

                            • Guest

                              #15
                              Originally posted by chuck hahn
                              They put stuff in the water down here , Octain. I have taken the airboxes off more times than i can count and i can do it in about 5 minutes now.. but at first you dont know what all it snags on or the tricks of the trade..so as a nebie it isnt so easy. Now is it?

                              Is it what, easy or not so easy?

                              Comment

                              Working...