Springs in carb

[JRossi17]

One of my springs went missing from my carb and i am trying to find it on bikebandit.com so i can order another one but i dont see it. Its the needle that goes on top of the carb where the engine meets the carb its a small brass needle and a spring that you adjust.

[BassCliff]

Hi,

Do you mean the spring in the "idle mixture screw" assembly?



It's found here (mixture screw)?




Thank you for your indulgence,

BassCliff

[Guest]

If those are the ones he is talking about I have a couple laying around.

[BassCliff]

Hi,

I don't think Suzuki sells those OEM because we're not supposed to get under that cap.

You might take up Mr. kparkfan on his spare parts. Or perhaps one of these vendors:

Sudco International - Carburetor parts, Classic & Late Model Replacement & Performance Parts, etc.
http://www.sudco.com/ (http://www.sudco.com/oemcarbparts.html)
MotorcycleCarbs.com - Carburetor parts, etc.
http://www.motorcyclecarbs.com/index.cfm
Jets R Us - Carburetor parts, filters, gauges, etc.

http://www.jetsrus.com/

Thank you for your indulgence,

BassCliff

[Redman]

Yah, Officailly those did not exisit.
Factory manaul doesnt acknolodge thier existence either, other than to make some statment about factory calibration that does not need further attention (or something like that). Stock from the factory those are under a plug/cap.

.

[JRossi17]

If you'd be willing to part with some id shoot ya some cash

[SqDancerLynn1]

The only other way to get them is to buy carb kits

[5t341th]

any other way to get those springs?? mine did not come with it when i bought it. I also have no idea how important they are to the operation of the screw. i am currently putting the carbs back together and this is the only thing holding me back. i want to ride this thing!

[GateKeeper]

could a spring from a ball point pen be used ?

[5t341th]

could a spring from a ball point pen be used ?

good idea. i just used a couple and put it in there. hope it works out