I have an 81 GS750L, KN pods, dyno jet stage 3, each 2 into 1 exhaust no muffler or baffles. I had this at the end of another post but wanted to start a new post as it is a new problem. I have a high idle that can't be adjusted any lower with the screw. I read many posts regarding high idle and I know it is not related to tension on throttle cable as it is on a loose setting. I know I need to sync the carbs but how do I make it idle lower or will it? When I tune the carbs can that bring the idle down?
-
-
If you have one carb where the sync screw is way out it will idle high.
I'd check to see if there is a clamp screw in the way of the throttle linkage. -
Check your carb synch.Comment
-
I have a friend coming Monday to help me sync carbs. Still have cold header on 3rd pipe!! Going to test compression on monday as well. This thing will run, might be next month but someday this thing will work!!! I just pulled the plug for the 3rd pipe and it was soaking wet with gas. I'm not sure what that means maybe too rich and now allowing combustion? I will try to adjust carbs.Comment
Comment