So, is a Mikuni BS36SS the same in all applications?

[oldrookie]

I'd like to get the o-rings ordered before I tear my carbs down for a cleaning, but I'm running a GR650, not a GS.

It looks like the part numbers are all the same between BS36SS carbs used on different bikes, but never hurts to ask.

I assume I just need the o-ring kits for a Mikuni BS36SS without regard for which bike is using that carb, correct?

[Nessism]

This carb rebuild tutorial shows a set of 36's from an 1150. If you carbs are similar I think it's safe to order the O-ring kit from cycleorings.com. I also list the O-ring sizes you need so you can purchase them local, or get some viton o-rings (the cycleorings.com kits of Buna-N O-rings), as you see fit.

http://www.mediafire.com/file/zx5unr1sxq0cvvx/Mikuni%20BS%20%28CV%29%20Carburetor%20Rebuild%20Tutorial-2.pdf

[oldrookie]

Thank you, Nessism.

I have been reading through your very well done tutorial in preparation to getting into my project. Very nicely put together.

Appreciate the help.