Hey guys, like a total newb I started disassembling my carbs without first consulting the Carb Rebuild Tutorial. So far so good, except that I didn't mark the carbs to be put back in order. Is that going to be a big issue? If so... how do I know which go where?
-
-
They'll only slot together in one formation but as we don't know which bike you have we can't help you with what to look for.79 GS1000S
79 GS1000S (another one)
80 GSX750
80 GS550
80 CB650 cafe racer
75 PC50 - the one with OHV and pedals...
75 TS100 - being ridden (suicidally) by my father -
knowing what bike you have may give us a clue to help you1978 GS1085.
Just remember, an opinion without 3.14 is just an onion!Comment
-
Sorry, just added that to my signature 30sec ago when I realized I didn't post the bike. Amateur!
1980 850GComment
-
The 2 outside carbs have fuel inlets on one side only (their inside).
The 2 insides have the carb vent tubes on their outsides.
This will show you:
79 GS1000S
79 GS1000S (another one)
80 GSX750
80 GS550
80 CB650 cafe racer
75 PC50 - the one with OHV and pedals...
75 TS100 - being ridden (suicidally) by my fatherComment
Comment