need quick answer

[Guest]

Forgot to close petcock.

does not appear gas in oil
But does appear that engine head gasket is seeping.


What should I do before I run the bike?

[BassCliff]

Hi,

The head gasket is seeping what? Did you check the oil level?

There's a chance that one of the cylinders is full of gas which will cause a hydro-lock if you try to start. Take out all of the plugs and spin the motor a few times. Be prepared for gasoline to spew out. It might be a mess but it's better than bending a rod.


Thank you for your indulgence,

BassCliff

[Guest]

That worked great. On second crank the gas shot about5 feet out of the no. 3 cylinder. So translation of spew is be sure to have rag ready to catch it!

Am thankful I just had changed oil. The oil was untouched. Then rode about 100 miles without incident.

Thanks for the quick reply!