That motorcyclecarbs place was a rip off business. Stay clear. Several members here have posted negative info about them.
-
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
For parts at reasonable prices and shipping that should arrive in a few days,
CALL the good folks at Z1enterprizes.com
They have just about everything that you need for your carbs or can get them for you.
Most of what they carry/supply is NOT on their website.
Again, CALL THEM.
DanielComment
-
Now that's what I needed to hear. I'll call them first thing tomorrow.
THANK YOU!!!Comment
-
It's not looking good. Z1 doesn't have most of the parts.
I can get them from dealer maybe... anyone have mikuni parts sitting around?Comment
-
What do you need?Comment
-
one 115 jet, one 180 pilot air jet, one X-5 needle jet, maybe one or two 5D50 needles. There's some issue over pilot air jets. The Z1 guy says I need 190's for pilots, the manual says 180's. The manual is suzuki printed, the parts list is suzuki printed. Those don't match. there's a guy at work that may have some parts, and if not, the Z1 guy says that suzuki corporate says I can still get the parts, but availability is "limited". Either way, I'm looking at 3 weeks for a dealer order. That kills my ambitions to make it run by August 28.Comment
-
Definitely only one 5D50 needle. I'm going to place an order somewhere by tomorrow.Comment
-
I have all the above
1-115 main jet
2-5D50 Jet needle
1-X-5 Needle jet
1-180 Pilot air jet (it says 175 but I have a set of carbs with 180 and I matched it and drilled it so it is a 180)
I can get them out today if I hear from you in time.Comment
Comment