GS1100 Carb Jetted and Rebuild But does not work

[Guest]

Good one Cliff!
I'd be really interested in seeing the #2 plug.

[Cyrillink]

Sorry Guys have not seen the bike for a week now.
i could not make it out to the garage. its has been really hard with work in NY.
So i am saving on the travel. kinda sucks.

[Guy]

Black smoke = running rich, sooty plugs.
White smoke = BURNING OIL, oily plugs.
Whatever fuelling issues you have with the pods and the stage 3 kit, you appear to be burning oil, and lots of it.

[rustybronco]

In the DJ stage 3 kit jasontheterminator bought, the needles were the wrong ones. I suggest you remove a (the) needle (s), measure the length and diameter and give dynojet a call and make sure you have the correct needles for your kit.

[Guest]

@TheCafeKid :I have replaced everything but the stage 3 needle and the Jet. I purchased this kit. http://cgi.ebay.com/ebaymotors/80-83...Q5fAccessories

The add does not mention who makes makes the kit or what stage kit it is. It does not look like a DJ kit. See screen shot of ebay ad here:



See this article from DJ about fraud with their kits

http://www.dynojet.com/whats_new/PressReleaseKnockOffJetKits.pdf

-Dave

[Guest]

That's just a rebuild kit.
Dynojet is a performance kit.

[Guest]

In the DJ stage 3 kit jasontheterminator bought, the needles were the wrong ones. I suggest you remove a (the) needle (s), measure the length and diameter and give dynojet a call and make sure you have the correct needles for your kit.

Scroll up a few comments and read mine and chefs remarks. It does not apprear that he is using a DJ kit but just some stock aftermarket rebuild kit.

[rustybronco]

That's now clear. a bit earlier it wasn't.

New PARTS ALL AROUND pilots, jets, stage 3 kit, the full rebuild!
and eats a liter of gas in a min !
please help

Stage 3?

The Stage 3 kit is designed for pod filters and a free-flowing (V&H 4-n-1 or similar) exhaust.

CYr,
IIRC stage 3 in a dynojet kit for an 1100E...

The DJ kits only come with one size of needles, so I'm not sure what you're referring to there.

@TheCafeKid :I have replaced everything but the stage 3 needle and the Jet.

and the stage 3 kit,

[Cyrillink]

hey Guys i am back, just finished all of my electrical work! finally Headlight works, bike starts right away! brilliant! coils firing at 100% i am excited about it! took the bike around the block! now to deal with this smoke.!
its white smoke!
two things i would like to show!
one

https://picasaweb.google.com/lh/photo/66oMeAcuIsnq5-nvyUopfw?feat=directlink

Than i have a small air filer on my head,
two which also smokes

https://picasaweb.google.com/lh/photo/gwF_6DcJp988cnkjaB4BMw?feat=directlink

[Cyrillink]

i have the Dynojet kit already setup but i used all new rubbers and injectors from the new kit i bought. i left all of the dyno jets parts and replaced the others.

[Cyrillink]

and i bought the original dyno kit from a legit site.