Need two carb boots like these..Please help

[Bcrusep]

IN INCHES
From a 1977 GS400..Thanks

[Guest]

Aaaah I get ya, started a newey and deleted the old one

I think the 78 onwards will be fine, pasting the measurements from my PM here for future reference:

Anyway, the mounting holes to the head are about 70mm centre to centre (about 2.75").

The outside diameter of the boot itself is about 55mm (about 2.16").

The boot appears to be about 5mm thick, so I think the inside diameter of the boot would be about 45mm (about 1.77").

The boot itself is about 25mm high (about 0.98") and the mounting bit is about 4mm high (about 0.16"), meaning the total height is about 29mm (about 1.14").

I don't have the proper inside measurements due to the carbs being installed, but everything I see there really reminds me of the ones on my '82.

Also, this is just one page of what Sudco has, more than likely they'll have something suitable too:

http://www.sudco.com/CatalogJPG/130.jpg

[quiktrp]

jc whitney sells universal mikuni boots for much cheaper than suzuki. The ones I got were about $20 ea.

[Guest]

As a comparison, Boulevard Suzuki has the ones that suit my '82 450 for $25.01 each which are the ones I measured above to compare.

[78gs1000]

I have 4 that will fit from my old bike, It died but needless to say I bought new carb boots like that one about a month before it croaked on me!! I paid about 100 bucks for the 4 of them, I'll sell them about 10 bucks each if your interested!!