below are the carbs im looking at,i know the chokes different but no biggie just wanna be sure the carbs will match up with the intake boots and all
Announcement
				
					Collapse
				
			
		
	
		
			
				No announcement yet.
				
			
				
	
will these carbs fit my bike
				
					Collapse
				
			
		
	X
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 Mental2 Mental2
 will these carbs fit my bikestill working on my 1980 gs1000g trying to find a decent set of afforable carbs do carbs from early 80s kz1000s fit my bike?
 
 below are the carbs im looking at,i know the chokes different but no biggie just wanna be sure the carbs will match up with the intake boots and allTags: None
 
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
 Don't know if they will fit, but what's wrong with the carbs you have? 
 
 .sigpic
 mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
 hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
 #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
 #2 son: 1980 GS1000G
 Family Portrait
 Siblings and Spouses
 Mom's first ride
 Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
 (Click on my username in the upper-left corner for e-mail info.)
 
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 Mental2 Mental2
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 BassCliff BassCliff
 Hi,
 
 I'll bet one of the members has a spare carb body for you. Post in the "Parts Wanted" section. It's hard to say if the Kaw carb rack will have the same spacing. Are they BS34SS carbs? One of those bodies might fit on the Suzuki carb rack, but I have no first hand knowledge.
 
 
 Thank you for your indulgence,
 
 BassCliff
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 Mental2 Mental2
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 BassCliff BassCliff
 Hi,
 
 Not only do the carb throats have to fit, the the rack spacing has to fit too (how far apart the carbs are from each other).
 
 
 Thank you for your indulgence,
 
 BassCliff
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 7981GS 7981GS
 Does the gang plate (or whatever it is called) clear your cam chain tensioner?
 Is the idle screw mounted on the bottom?
 I made a set fit but it was NOT easy. 
 
  
 
 
 Daniel
 Comment
.png)
Comment