I dont know what to try next. Anyone have this issue before?
Announcement
				
					Collapse
				
			
		
	
		
			
				No announcement yet.
				
			
				
	
Carb cleaning problems
				
					Collapse
				
			
		
	X
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
 Carb cleaning problemsI am trying to clean a set of gsxr carbs. I have soaked them in my usual stuff, Gunk hydroseal. The metal and brass parts are coming out nice, but the carb bodies end up with a white powdery stuff on them after drying. The powdery stuff comes off on your finger when you wipe them.
 I dont know what to try next. Anyone have this issue before?Tags: None
 
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	Forum LongTimerGSResource Superstar
 Past Site Supporter
 Super Site Supporter- Mar 2006
- 36165
- Torrance, CA
 
 Maybe scrub down the carb with a tooth brush and dish soap after the dip rinse process? Spray with WD-40 after that?Ed
 
 To measure is to know.
 
 Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
 
 Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
 
 Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
 
 KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 Billy Ricks Billy Ricks
 A little aluminum polish thinned down with some mineral spirits so it's not so pasty will work. Use Q-tips and small artists brushes to get down in the crevices. The soft metal the carbs are made out of polish up almost like chrome. Once you get started you'll get carried away.
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 AJ AJ
 Comment
.png)
Comment