GS1150 carbs

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Tazman001
    Forum Mentor
    • Feb 2007
    • 534
    • NE Ohio
    #1

    GS1150 carbs

    I'm cleaning up my 1150E carbs, and would like to know if the o-ring kits from robert barr for the 1100 carbs will work? RapidRay, blowerbike you guys know Bueller? Bueller? Anyone? Anyone?
    1981 GS750L (sold)
    1981 GS750L (current)
    1978 Yamaha RD400 (RD = Race Development)
    1981 Honda CT70 (86+ MPG at WOT most of the time)
    1983 GS1100GL (needs work: update, gone to a new home)
    1956 Simplex (with a TS250 motor)
    1985 GS1150E (Hammer Time!!)
    1998 1200 Bandit (Rattler)
    1980 GS1100L (Janice)
    Do I continue?

    "An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." - Col Jeff Cooper
    e tan, e epi tan
    MOLON LABE
    Tags: None
    • blowerbike
      Forum Guru
      GSResource Superstar
      • Aug 2008
      • 7057
      • Ohio Closer to KY Than Cleveland
      #2
      Originally posted by Tazman001
      I'm cleaning up my 1150E carbs, and would like to know if the o-ring kits from robert barr for the 1100 carbs will work? RapidRay, blowerbike you guys know Bueller? Bueller? Anyone? Anyone?
      i believe so.
      32/34/36 should be the same.
      maybe chef bill or jim...ed???
      i'm just guessing.
      anyone???
      Last edited by blowerbike; 11-06-2011, 09:58 PM. Reason: uhuh

        Comment

        • Nessism
          Forum LongTimer
          GSResource Superstar
          Past Site Supporter
          Super Site Supporter
          • Mar 2006
          • 35791
          • Torrance, CA
          #3
          If you read the rebuild tutorial (linked in my signature) you would know the answer.
          Ed

          To measure is to know.

          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

            Comment

            • jwhelan65
              #4
              Originally posted by Nessism
              If you read the rebuild tutorial (linked in my signature) you would know the answer.

              Best carb how to out there IMO.

                Comment

                • Guest
                  #5
                  Yes they fit. You won't need some of the vent o-rings since the BS36s use rubber hoses to connect the carbs.

                    Comment

                    Previous template Next
                    Working...