gs450 rebuilt kit attempt to locate
Anyone know where I can find good carb rebuild kits for my 82 gs450t? Thanks in advance.
-
-
cycleorings.com
Get carb O-ring kit and intake boot O-rings.
90% of the time this is all you need. If you need gaskets or pilot plugs, try Z1 Enterprises.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
Hi,
Yes, just get yourself a bunch of new O-rings and follow the instructions in Mr. Nessism's carb rebuild tutorial. There is also a 450-specific guide on my little website. There's no need to buy expensive (but junky) aftermarket "carb kits". Just clean everything properly and reassemble with new O-rings. If you do need to replace a worn jet, needle, or seal, get OEM parts because they work the best. Check the maintenance lists in your "mega-welcome" for the other things your bike needs.
Thank you for your indulgence,
BassCliffComment
-
+1 to all of the above, and don't forget to clean your carbs thoroughly!
I mean thoroughly as in dip in Berryman's or whatever you can get where you are (I used Yamaha Yamalube carb cleaner over here in Aus) and make sure you get every little passage and orifice clean as a whistle. Do it once and do it properly
Comment
Comment