XXXSeanaXXX
Announcement
				
					Collapse
				
			
		
	
		
			
				No announcement yet.
				
			
				
	
stuck needle jets...
				
					Collapse
				
			
		
	X
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 Seana23 Seana23
  stuck needle jets...
								They be stuck good and proper.....any ideas? they are a push-fit with the main jet screwed into the top but wont budge... dont want to get all butch on the carbs ass, as this will end in tears, so any "Passive" suggestions greatfully received. stuck needle jets...
								They be stuck good and proper.....any ideas? they are a push-fit with the main jet screwed into the top but wont budge... dont want to get all butch on the carbs ass, as this will end in tears, so any "Passive" suggestions greatfully received.
 
 XXXSeanaXXX
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 Seana23 Seana23
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 AJ AJ
 Next time, a drop or two of Marvel Mystery Oil into each slide and let sit overnight. MMO is great for working on carbs. In fact, that's what it was designed for!  
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
 I tap them out with the large end of the choke rod.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
 1985 GS1150ES stock with 85 Red E bodywork.
 
  
 Comment
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	 Seana23 Seana23
 yes, thanx all. i used a blunt pencil and small hammer and out they popped... all the tiny holes seemed fine but its good to know anyway.
 thanx for all ya help.
 
 XXXSeanaXXX
 
 ....nearly there....
 
 X
 Comment
.png)
Comment