Intake boots for '81 GS650G

[Raulmanny50]

I need to get four new intake boots for a 1981 GS650G (connects from carb to heads) and the clamps. Any help of where to find that will be appreciated. Thanks!

[bccap]

Part number 21 and 22. Clamps are there too.
http://www.boulevardsuzuki.com/fiche...1981&fveh=2127

[Raulmanny50]

Intake boots left and right?

BBCP, shoule i buy two left and two right?

[bccap]

That's right. And most importantly, 4 o rings, part number 24. Are your old boots shot ? Hardened or torn ?

[Raulmanny50]

intake boots for suzuki gs650g 1981

they have leaks, maybe hardened or have craks, i did not know regarding the o-rings. I guess that they go by the heads side.

[bccap]

Are you doing your carbs at the same time ? If so, I suggest you order a complete set from Robert Barr. He has the o rings as well as stainless steel bolts for the boots. I can't remember the price, but it was less than $25. Then order the boots and clamps from Boulevard. If not get get everything from Boulevard.

[BigD_83]

Where are you located? I might have some boots you could have for a good deal.

[Raulmanny50]

intake boots for '81 GS650G

are the screws to attach the boots to the heads?
Thanks for all you help!

[Raulmanny50]

intake boots '81 GS650G

South Florida, already ordered the boots from SuZuki boulevard

[bccap]

are the screws to attach the boots to the heads?
Thanks for all you help!

Yup. The ones from Robert Barr are also allen head, for easier removal. Which I'm sure you already have found out. He is also a member of the GS. Have a look on his site. cycleorings.com.

[Raulmanny50]

intake boots '81 GS650G

BCCAP, I got the new (suzuki brand) rubber boots from Boulevard. any trick to loose the phillips screws?

[GateKeeper]

impact screwdriver, is your friend, if a regular screwdriver will not do it

[tkent02]

Use the impact with a few socket extensions, you can reach through the space where the air box goes to get room to whack it.