Correct Main Jets for VM26SS

[providedrailroad]

Are these the correct type?

http://www.directharleyparts.com/fuel-carburator-jets-mikuni-main-jets-mikuni-smoothbore-carburetor-main-jets-pack-size-p-6646.html

I know the VM28/VM33 smoothbore are basically the non-OEM version of these carbs, so I would think this is right.

I found this site too that has some information about Mikuni Jets:

http://www.pjmotorsports.com/mikuni-jets.html

[7981GS]

Just get your jets from Z1 Enterprises at $1.74 each and be happy.
The large round or small round ones will work. I have never tried the hex ones myself.

Daniel

[chuck hahn]

If they are original Mikuni parts and the right num ber then yes they are what you need. I try to get originals as some have pointed out that what may be their 120 standard hole size isnt necessarily another companies standard hole size..

[providedrailroad]

Cool, I had trouble finding them on the Z1 site but got it now. If a moderator wants to delete this thread so it doesn't spam up the Carb forum then go for it!

[Nessism]

Just make sure Z1 is selling real Mikuni jets, not jets made by K&L.

[tkent02]

Just make sure Z1 is selling real Mikuni jets, not jets made by K&L.

They are real.

[allojohn]

Are these the correct type?

http://www.directharleyparts.com/fuel-carburator-jets-mikuni-main-jets-mikuni-smoothbore-carburetor-main-jets-pack-size-p-6646.html

I know the VM28/VM33 smoothbore are basically the non-OEM version of these carbs, so I would think this is right.

I found this site too that has some information about Mikuni Jets:
http://www.pjmotorsports.com/mikuni-jets.html

These are the real ones. If you buy from Z1 make sure they look like these.