The Devil's Workshop

[MisterCinders]

Had my carbs off today and checked the float heights...........24mm DOH!

I set them after I dipped 'em as per the rebuild. Bikes been running just fine. I think I'll leave them at 24mm.

Yeah. The manual is from 1976-77, and the first model year for the GS 750 had bigger stock jets and a 26mm float heigh spec. Later, for some reason, they shuffled the specs to lower the float height, but reduce the stock jet sizes. For instance the pilot on a 1977 model is a 22.5 or 17.5 IIRC but the later models dropped to 15.

[MisterCinders]

Slides seem to behave now, but won't know for sure until I ride. Of course it's about 1,000 degrees out, so I'll wait until later.

[JimmyR]

That's a lot of degrees.