Will probably order from mcmaster-carr unless there is an easy place to go grab it (does autozone / advance auto parts sell this stuff by the foot?)
Announcement
				
					Collapse
				
			
		
	
		
			
				No announcement yet.
				
			
				
	
Vent tubing
				
					Collapse
				
			
		
	X
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
 Vent tubingHey all, just a quick question. What kind of hose should I get to replace my missing carburetor fuel vent tubes (the ones that connect to the T-junctions between the carbs)? As I understand it from what I've read on bikecliff's site, I need 5mm (or 3/16") tubing but I don't really know what kind to get.
 
 Will probably order from mcmaster-carr unless there is an easy place to go grab it (does autozone / advance auto parts sell this stuff by the foot?)Tags: None
 
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
 Just something that can withstand the heat, usually vacuum hose works fine.sigpicMrBill Been a GSR member on and off since April 2002
 1980 GS 750E Bought new in Feb of 1980
 2015 CAN AM RTS
 
 
 Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.
 
- 
	
	
	
		
	
	
		
		
		
		
		
		
		
	
	
 That would be itOriginally posted by mrbill5491 View PostJust something that can withstand the heat, usually vacuum hose works fine.
 
 Thicker walls than stock, but works fine1978 GS 1000 (since new)
 1979 GS 1000 (The Fridge, superbike replica project)
 1978 GS 1000 (parts)
 1981 GS 850 (anyone want a project?)
 1981 GPZ 550 (backroad screamer)
 1970 450 Mk IIID (THUMP!)
 2007 DRz 400S
 1999 ATK 490ES
 1994 DR 350SES
 Comment
.png)

Comment