Choke lever lifters up/down ???

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • exdirtbiker
    Forum Sage
    • Aug 2011
    • 1579
    • 2 miles from exit 89: Brick NJ

    #1

    Choke lever lifters up/down ???

    Please tell me wich way is correct ... My bike had a mix of up and down!
    Is this correct or should I flip it ?

    1980 GS1000G - The Beast - GOING... GOING... yup, it's gone. I'm bikeless !!! GAaaahh !!!
    1978 KZ1000C1 Police - GONE !
    1983 GPZ750, aka ZX750A1 - restored, fresh paint... Gave it back, it was a loaner !!!
    Check My Albums for some of the 30+ headaches I've dealt with

    I know -JUST- enough to make me REALLY dangerous !


  • tkent02
    Forum LongTimer
    Past Site Supporter
    • Jan 2006
    • 35571
    • Near South Park

    #2
    It doesn't really matter as long as they are all the same. I put them in however it makes them all close the tightest when the choke is off.


    I think that one is upside down but like I said, as long as they are all the same...
    http://img.photobucket.com/albums/v5...tatesMap-1.jpg

    Life is too short to ride an L.

    Comment

    • Guest

      #3
      Down is off, on is up, should all be the same way.

      Comment

      • exdirtbiker
        Forum Sage
        • Aug 2011
        • 1579
        • 2 miles from exit 89: Brick NJ

        #4
        Originally posted by recycled64
        Down is off, on is up, should all be the same way.
        Yes, they are now all the same way.
        The ??? is... is the pic correct or do I have the lifter upside down ?
        it "works" either way... but seems like the way in the pic makes more sense.
        If it truly doesn't matter, I will leave them as pictured.
        1980 GS1000G - The Beast - GOING... GOING... yup, it's gone. I'm bikeless !!! GAaaahh !!!
        1978 KZ1000C1 Police - GONE !
        1983 GPZ750, aka ZX750A1 - restored, fresh paint... Gave it back, it was a loaner !!!
        Check My Albums for some of the 30+ headaches I've dealt with

        I know -JUST- enough to make me REALLY dangerous !


        Comment

        • Guest

          #5
          Yeah, pic's correct.

          Comment

          • hampshirehog
            Forum LongTimer
            Past Site Supporter
            • Oct 2007
            • 12675
            • Hampshire. UK

            #6
            I think it's upside down but without looking I'm not 100% sure. If those carbs have a cable operated choke then the lifter associated with the cable will show you which way up the things go.
            79 GS1000S
            79 GS1000S (another one)
            80 GSX750
            80 GS550
            80 CB650 cafe racer
            75 PC50 - the one with OHV and pedals...
            75 TS100 - being ridden (suicidally) by my father

            Comment

            • exdirtbiker
              Forum Sage
              • Aug 2011
              • 1579
              • 2 miles from exit 89: Brick NJ

              #7
              Originally posted by hampshirehog
              .. If those carbs have a cable operated choke then the lifter associated with the cable will show you which way up the things go.
              I was hoping that was true, but again, it seems to work either way !
              1980 GS1000G - The Beast - GOING... GOING... yup, it's gone. I'm bikeless !!! GAaaahh !!!
              1978 KZ1000C1 Police - GONE !
              1983 GPZ750, aka ZX750A1 - restored, fresh paint... Gave it back, it was a loaner !!!
              Check My Albums for some of the 30+ headaches I've dealt with

              I know -JUST- enough to make me REALLY dangerous !


              Comment

              • hampshirehog
                Forum LongTimer
                Past Site Supporter
                • Oct 2007
                • 12675
                • Hampshire. UK

                #8
                What are they off? I can't think of a cable lifting choke mechanism that will fit both ways up.
                79 GS1000S
                79 GS1000S (another one)
                80 GSX750
                80 GS550
                80 CB650 cafe racer
                75 PC50 - the one with OHV and pedals...
                75 TS100 - being ridden (suicidally) by my father

                Comment

                • OLDENUFF

                  #9
                  The rod should extend thru the lifter, not just one side.

                  Comment

                  • exdirtbiker
                    Forum Sage
                    • Aug 2011
                    • 1579
                    • 2 miles from exit 89: Brick NJ

                    #10
                    Originally posted by OLDENUFF
                    The rod should extend thru the lifter, not just one side.
                    The tabs are on both sides, the pic just looks funny.

                    1979 GS1000L

                    Thanks for the quick replies !
                    1980 GS1000G - The Beast - GOING... GOING... yup, it's gone. I'm bikeless !!! GAaaahh !!!
                    1978 KZ1000C1 Police - GONE !
                    1983 GPZ750, aka ZX750A1 - restored, fresh paint... Gave it back, it was a loaner !!!
                    Check My Albums for some of the 30+ headaches I've dealt with

                    I know -JUST- enough to make me REALLY dangerous !


                    Comment

                    • hampshirehog
                      Forum LongTimer
                      Past Site Supporter
                      • Oct 2007
                      • 12675
                      • Hampshire. UK

                      #11
                      Checked on my bikes today - upside down. Plus the yellow paint on all of mine, if it's still there, is on the top.

                      My 1ks are cable operated and the lifter where the cable fits can only go one way up - just pulled the set on one bike to check.
                      79 GS1000S
                      79 GS1000S (another one)
                      80 GSX750
                      80 GS550
                      80 CB650 cafe racer
                      75 PC50 - the one with OHV and pedals...
                      75 TS100 - being ridden (suicidally) by my father

                      Comment

                      • exdirtbiker
                        Forum Sage
                        • Aug 2011
                        • 1579
                        • 2 miles from exit 89: Brick NJ

                        #12
                        Originally posted by hampshirehog
                        Checked on my bikes today - upside down. Plus the yellow paint on all of mine, if it's still there, is on the top.

                        My 1ks are cable operated and the lifter where the cable fits can only go one way up - just pulled the set on one bike to check.
                        since the rack is -still- not installed, I will try to flip them and see if it makes more sense.
                        Thanks again, all !
                        1980 GS1000G - The Beast - GOING... GOING... yup, it's gone. I'm bikeless !!! GAaaahh !!!
                        1978 KZ1000C1 Police - GONE !
                        1983 GPZ750, aka ZX750A1 - restored, fresh paint... Gave it back, it was a loaner !!!
                        Check My Albums for some of the 30+ headaches I've dealt with

                        I know -JUST- enough to make me REALLY dangerous !


                        Comment

                        • allojohn
                          Forum Sage
                          Past Site Supporter
                          Super Site Supporter
                          • Jan 2011
                          • 3515
                          • NoMo, MN

                          #13
                          Confirmed. The larger lobe should face down.
                          -Mal

                          "The only reason for time is so that everything doesn't happen at once." - B. Banzai
                          ___________

                          78 GS750E

                          Comment

                          • exdirtbiker
                            Forum Sage
                            • Aug 2011
                            • 1579
                            • 2 miles from exit 89: Brick NJ

                            #14
                            Originally posted by hampshirehog
                            I think it's upside down but without looking I'm not 100% sure. If those carbs have a cable operated choke then the lifter associated with the cable will show you which way up the things go.
                            Confirmed again... The lifter with the cable on it will only fit one way, I guess I should have looked at that a little closer.
                            Thanks again everyone.
                            1980 GS1000G - The Beast - GOING... GOING... yup, it's gone. I'm bikeless !!! GAaaahh !!!
                            1978 KZ1000C1 Police - GONE !
                            1983 GPZ750, aka ZX750A1 - restored, fresh paint... Gave it back, it was a loaner !!!
                            Check My Albums for some of the 30+ headaches I've dealt with

                            I know -JUST- enough to make me REALLY dangerous !


                            Comment

                            Working...