Announcement

Collapse
No announcement yet.

'78 750E - Anyone happen to know...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    '78 750E - Anyone happen to know...

    '78 750E - Anyone happen to know the size, thread pitch and length of the small screws which hold the needle assembly to the slide?



    Yeah, I know I can measure myself but I don't want to tear the carbs down yet, still riding but getting colder.
    I rounded off the head on a couple and want to replace with alum head.
    -Mal

    "The only reason for time is so that everything doesn't happen at once." - B. Banzai
    ___________

    78 GS750E

    #2
    M3-14

    I replaced mine with hex heads, the notes I left in my log say M3-14. See post #9 this thread

    Comment


      #3
      Originally posted by btbarb View Post
      I replaced mine with hex heads, the notes I left in my log say M3-14. See post #9 this thread
      Magic! Thanks Bryan, much appreciated.
      -Mal

      "The only reason for time is so that everything doesn't happen at once." - B. Banzai
      ___________

      78 GS750E

      Comment


        #4
        I have lots of extra parts for these carbs.....
        David
        1998 Suzuki Bandit
        1978 GS750 gone but not forgotten
        1978 GS1000 - gone
        1981 GS850 - gone

        Comment


          #5
          Originally posted by portdave View Post
          I have lots of extra parts for these carbs.....
          Thanks Dave, duly noted.
          -Mal

          "The only reason for time is so that everything doesn't happen at once." - B. Banzai
          ___________

          78 GS750E

          Comment

          Working...
          X