Best, Non Abrasive Way to Clean Carb Diaphragms

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • NateTheNewb

    #1

    Best, Non Abrasive Way to Clean Carb Diaphragms

    I was surprised not to find an old thread on the matter...what do most use when cleaning their carb diaphragms in a way not to destroy them?
  • chuck hahn
    Forum LongTimer
    Past Site Supporter
    • May 2009
    • 25918
    • Norman, Oklahoma

    #2
    Vinegar soak. In the morning just wash with warm water and dish soap..rub with fingers and all the scum will rinse right off.
    MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
    1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

    NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


    I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

    Comment

    • NateTheNewb

      #3
      Okay, thanks! So you're just saying, the night before put them in straight vinegar, no dilution, before going to sleep and soapy water in the morning?

      Nate

      Comment

      • Nessism
        Forum LongTimer
        GSResource Superstar
        Past Site Supporter
        Super Site Supporter
        • Mar 2006
        • 35790
        • Torrance, CA

        #4
        Sorry chuck, but I wouldn't put them in vinegar. Use soap and water. Be nice to them or the diaphragms may fail.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment

        • chuck hahn
          Forum LongTimer
          Past Site Supporter
          • May 2009
          • 25918
          • Norman, Oklahoma

          #5
          Vinegar will not hurt rubber or plastic parts in any way..sorry.
          MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
          1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

          NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


          I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

          Comment

          • chuck hahn
            Forum LongTimer
            Past Site Supporter
            • May 2009
            • 25918
            • Norman, Oklahoma

            #6
            Yes Nate..thats what I am saying..They will probably only need a few hrs though in actuality.
            MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
            1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

            NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


            I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

            Comment

            • salty_monk
              Forum LongTimer
              GSResource Superstar
              Past Site Supporter
              Super Site Supporter
              • Oct 2006
              • 14002
              • London, UK to Redondo Beach, California

              #7
              Silicon spray I've used in the past... Guessing WD40 would probably be ok too.
              1980 GS1000G - Sold
              1978 GS1000E - Finished!
              1980 GS550E - Fixed & given to a friend
              1983 GS750ES Special - Sold
              2009 KLR 650 - Sold - gone to TX!
              1982 GS1100G - Rebuilt and finished. - Sold
              2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!

              www.parasiticsanalytics.com

              TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

              Comment

              • chuck hahn
                Forum LongTimer
                Past Site Supporter
                • May 2009
                • 25918
                • Norman, Oklahoma

                #8
                Calcified shower heads clean up well in an overnight vinegar bath too. Its cheap and environmentally safe.
                MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
                1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

                NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


                I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

                Comment

                • Guest

                  #9
                  Originally posted by chuck hahn
                  Calcified shower heads clean up well in an overnight vinegar bath too. Its cheap and environmentally safe.
                  Done this many times, works great!

                  Comment

                  • Steve
                    GS Whisperer
                    • Jun 2005
                    • 35925
                    • southwest oHIo

                    #10
                    Nice to know this, but I have never had to clean any diaphragms.

                    .
                    sigpic
                    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                    #2 son: 1980 GS1000G
                    Family Portrait
                    Siblings and Spouses
                    Mom's first ride
                    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                    (Click on my username in the upper-left corner for e-mail info.)

                    Comment

                    Working...