Announcement

Collapse
No announcement yet.

carbs leaking gas out of intake!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Full tear down and dipping ( 24 HRS per carb body..2 bodies in the can at the same time) Internals also get a 24 HR dipping. Poke all the holes with a fine wire and be sure to get the one at the tip of the pilot screws.

    New orings from cycleorings.com

    Lube orings with some grease or vaseline when installing the screws.

    Proper float hts

    Valves adjusted

    Vacuum gauge sync once all maintenance is done and its back running.

    Check timing.
    MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
    1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

    NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


    I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

    Comment

    Working...
    X