carb rebuild help

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dark7068
    #1

    carb rebuild help

    I got the orings in today from cycleorings, and took the carbs off just now. Noticed on the right carb it doesn't seems right. The carbs are the twins on my 85 EF..I had problems with fuel spilling out and I think I found out why. The vent tube from the right carb actually goes all the way thru.. Looks like its rusted out on the right side of the body of the carb, while the left one is not. should it be like that???

    pix to follow
    Tags: None
    • dark7068
      #2
      picture

      its the right middle hole..




      also why the right side wasn't running right. the float was stuck, has a bad case of greenies

        Comment

        • GateKeeper
          #3
          you have to get them spotless, at least on the inside.....




          more pics here

          1983_GS750E - Rebuild - The GSResources Forums
          http://www.thegsresources.com/_forum/showthread.php?t=184389&page=2
          Are you doing a restoration project of some kind on a GS? Let everyone see what you are doing by posting the details here.


          .

            Comment

            • Guest
              #4
              The vent is fine. It vents the float bowl.
              You are leaking because the carbs need new o-rings, float heigth set and they need cleaned cleaned cleaned
              Did I mention they needed cleaned?

                Comment

                • dark7068
                  #5
                  thanx a lot guys,, they are both soaking while I have supper and take dogs for a walk,, it will be spotless..

                  Rick

                    Comment

                    • Steve
                      GS Whisperer
                      • Jun 2005
                      • 35924
                      • southwest oHIo
                      #6
                      Originally posted by dark7068
                      thanx a lot guys,, they are both soaking while I have supper and take dogs for a walk,, it will be spotless..

                      Rick
                      Based on the pictures posted, they should still be soaking while you have supper TOMORROW.

                      .
                      sigpic
                      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                      #2 son: 1980 GS1000G
                      Family Portrait
                      Siblings and Spouses
                      Mom's first ride
                      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                      (Click on my username in the upper-left corner for e-mail info.)

                        Comment

                        • dark7068
                          #7
                          they will be.

                            Comment

                            • dark7068
                              #8
                              got the left one apart and soaking, and it was spotless inside,, but has a 1/2" nylon washer floating around inside

                              the right carb float, jets and tubes were plugged full of greenie,, hopefully its running tomorrow

                                Comment

                                • dark7068
                                  #9
                                  Carbs are cleaned and rebuilt, put together and on the bike. Idles like a DREAM. Fires first push of the button and idles and rev's up real quick. no to find a petcock for the tank then i can take it for a spin.Thanx a lot..

                                  Rick
                                  Last edited by Guest; 06-01-2013, 10:07 AM.

                                    Comment

                                    • Steve
                                      GS Whisperer
                                      • Jun 2005
                                      • 35924
                                      • southwest oHIo
                                      #10
                                      Now get the valves adjusted, it will feel that you almost don't have to actually push the button.

                                      .
                                      sigpic
                                      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                                      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                                      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                                      #2 son: 1980 GS1000G
                                      Family Portrait
                                      Siblings and Spouses
                                      Mom's first ride
                                      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                                      (Click on my username in the upper-left corner for e-mail info.)

                                        Comment

                                        • dark7068
                                          #11
                                          I was thinking that, but now to get my car going, then tomorrorw I will adjust the valves.

                                            Comment

                                            Previous template Next
                                            Working...