Announcement

Collapse
No announcement yet.

GS450 carb confusal...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GS450 carb confusal...

    I'm a bit confused when I look at different threads here on carbs for the 450. I have an '81 GS450S and according to the spreadsheet I found in one of the carb threads all of the 450's had BS34SS carbs on them. When I looked at the bikebandit website to check part numbers across the years (for interchangabilty on carb parts) I see the slide part numbers are different for 1980-81 than for the later years. Will new slides/diaphragms work in the older bodies? Mine have some holes and I was thinking about going with the diaphragms from jbmindustries. It seems easier and more sure fire than the plasti-dip repair method. I just don't want to end up with diaphragms that don't fit my carbs. If the diaphragm only part numbers were listed on bike bandit I wouldn't be asking this question, but I know the slide & diaphragm are sold as an assembly...

    It seems like a guy could make some extra money 'rebuilding' slides.

    #2
    The 80 - 82 450's carb's are BS34SS and are all the same. They changed in 83 but not sure what model they are.

    The slides and diaphragms, jets, etc. are all different so I would suggest later ones won't fit.

    Looking at the jbmindustries.com page, just measure for the right part as it looks like there are two options for BS34 carbs. Looks like just go here:

    http://jbmindustries.com/Dimensions.html

    Do us all a favour if you order them and tell JBM what you're putting them on so they can add the model of bike to their list
    1982 GS450E - The Wee Beastie
    1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

    sigpic

    450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

    Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

    Comment


      #3
      Greetings and Salutations!!

      Hi Mr. baroth,

      Sorry, I can't help you with your diaphragms but I can greet you properly.

      If you are here you probably have a 30 year old motorcycle that needs about 20 years worth of maintenance. In the links below you'll find maintenance lists, documentation, wiring diagrams, "how to" guides, vendor links, tips, tricks, and a whole lot of GS goodness. This is your "mega-welcome". Let's get started.

      Let me dump a TON of information on you and share some GS lovin'.

      I just stopped by to welcome you to the forum in my own, special way.

      If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....

      Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", "Top 15 Tips For GS Happiness", the Carb Cleanup Series, and the Stator Papers. All of these tasks must be addressed in order to have a safe, reliable machine. This is what NOT to do: Top 10 Newbie Mistakes. Now let me roll out the welcome mat for you...



      Please Click Here For Your Mega-Welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

      More links to helpful threads in the forum:
      Help! Your Bike Won't Start
      DON'T DO THESE THINGS
      Help! Your Bike Won't Run Well
      Oh God! Pods!



      Thanks for joining us. Keep us informed.

      Thank you for your indulgence,

      BassCliff

      Comment


        #4
        Originally posted by BassCliff View Post
        ...I can greet you properly.
        BassCliff
        Thanks, I've been looking over some of the information you gave me. I know I'm in the right place for collective wisdom on GS models. I've found owner forums and newsgroups to be extremely helpful in the past. I only hope I can add something with my presence.

        Comment

        Working...
        X