I don't think these carbs belong on my bike

[nejeff]

Thank you guys, I still didn't quite believe it. At least I have something to search for.

Were those actually bolted up on your bike or did you buy a "box" project bike? Can't believe the spacing would be exactly the same!

[Crage]

The carbs should have an identifying number on them somewhere. You can then reference them.

[kiddchaos]

They fit quite well actually, I bought the bike from my future father in law and he purchased it 6 years ago in good running condition. He only ever changed the oil in the bike once and put less than 50 miles on it.

[kiddchaos]

Any ideas where I should look for the number? I only see 3 and 2 on the bowls near the drain screws and C3 on cyl 1&2 and C4 on Cyl 3&4 near the gang plate on the engine side, and cylinder 1 and 4 are marked.

[kiddchaos]

Hitachi HSC32 Carbs

http://xjbikes.com/Forums/viewtopic/printertopic=1/t=35994/start=0/postdays=0/postorder=asc/vote=viewresult.html

Refrence, in case anyone wants to swap for some reason.

[nejeff]

Hitachi HSC32 Carbs

http://xjbikes.com/Forums/viewtopic/printertopic=1/t=35994/start=0/postdays=0/postorder=asc/vote=viewresult.html

Refrence, in case anyone wants to swap for some reason.

There you go, found them. Find yourself a set of GS carbs and throw these in the river (or on Ebay). Don't even bother with them another second, your bike will never be able to run correct with them or be troubleshooted properly