where are the a/f screws on a 1977 gs750

[ThrottleBack]

havent been on here in forever. but i have been doing some work to my buddys 77 gs750 and i know where the fuel screws are on the bottom of the carbs but there isnt any adjustment screws on the side of the carbs. i know some carbs have caps covering them and you have to drill into them to remove them to gain access to adjust them. but i have drill more then a 1/8th of an inch and there is just more metal, does this model not have these adjustment screws.

I think they are there, packed in under JB. How to undo that......hell

[tc862011]

its not any kind of jb or quick weld cause the one i tested was all straight aluminum

[tc862011]

they are mikuni carbs and look identical to the ones on my 550 exepct they are on a 750 and are missing the air screws

[ThrottleBack]

its not filled in my hand cause they are all identical like a machine did it, if it was hand filled it would look alot different on each one

nm then. Beer plz

[tc862011]

were some carbs made with out these air screws, i have never seen any

[Guest]

They should be VM26SS carburetors with air screws on the sides. None of the three sets of VM26SS carburetors that I have have the two wide horizontal casting lines in the middle and two smaller horizontal casting lines top and bottom.

[Agemax]

They should be VM26SS carburetors with air screws on the sides. None of the three sets of VM26SS carburetors that I have have the two wide horizontal castings in the middle and two smaller horizontal casting lines top and bottom.

thats what makes me think they are not the original carbs, plus the lack of air screws......

[Guest]

A better shot of the rack would be nice, I'm not seeing the brass vacuum barb on #3, and there should be a brass vent barb on #2 and #4 to the left of that triangular fin in the front of the carb. All three look alike and are in the same position on their respective carburetor bodies.

[portdave]

http://www.ebay.com/itm/Mikuni-Carburetors-Set-of-4-Kawasaki-KZ-/290929984911?pt=Motorcycles_Parts_Accessories&hash=item43bcc7458f&vxp=mtr

They look like these style....

[Guest]

It looks like you nailed it, his carburetors are not for a GS750.

[Hone101]

They are vm 22s that are common on 550s as far as I've seen. I dunno after googling it now. It looks like they could be vm28s from ???

[ThrottleBack]

If it were me I would be posting for a set of the correct carbs.

[Big T]

Those could be the VM 28s off of a Z1

Is there a pumper under the #2 float bowl?

[Steve]

nm then. Beer plz

Even google translator got lost on this one.



.

[ThrottleBack]

Just wanted a beer