Intake boots, come with vacuum port screws?

[Guest]

http://www.suzukipartshouse.com/oemparts/a/suz/50d3fdb8f8700230d8b4daeb/cylinder-head

If I order new intake boots (20 and 21) do they come with the vacuum port screws and gaskets (22 and 23)? Anyone who has ordered them know?

[Agemax]

no, you have to get them seperate. otherwise it would show it as 1 part number on the fiche

[exzachtly1]

Hmm, if I order these from Z1 it looks like they might be in there... at least in the picture it appears that way...

http://www.z1enterprises.com/ItemDetails.aspx?itemDescription=Carb+Holders+GS550+GS650&item=13110-47010-K

Anyone ordered them from Z1?

[exzachtly1]

Nevermind, boulevard suzuki had everything pretty cheap. Gonna order there I think

[Missile99]

If you haven't ordered yet Zach, hold off on those sync screws. The intake boots I bought from G&S came with new ones. I was simply going to re-use the old ones since they were fine. Don't forget to order 4 new o-rings though: 09280-38004

[exzachtly1]

If you haven't ordered yet Zach, hold off on those sync screws. The intake boots I bought from G&S came with new ones. I was simply going to re-use the old ones since they were fine. Don't forget to order 4 new o-rings though: 09280-38004

I ordered already, the screws were cheap so no sweat. I replaced the o rings last fall so I think I can reuse them, right?

[Missile99]

I ordered already, the screws were cheap so no sweat. I replaced the o rings last fall so I think I can reuse them, right?

Cool. If they end up being spare screws they'll probably come in handy for other projects. The o-rings should be fine. Lightly coat them in something like dielectric grease and you should have no issues.