.png "Powered by vBulletin")
Ok i need help, anyone know where i can get the fuel line and tee that fit on the VM22 carbs
-
-
Z1 has them....same as the VM 26s. Jeff or Chris can hook you up.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it. -
They are not the same, the tees are shorter.
Life is too short to ride an L.Comment
-
any suggestionsComment
-
Find someone with a lathe and make one. Pretty easy to do. One other option is call Z1 Enterprises and ask them to measure the T for the linked Kawasaki part to see how it compares to yours.
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
If your old one is leaking just soak it in petrol for a few hours. It'll swell up and seal ok.79 GS1000S
79 GS1000S (another one)
80 GSX750
80 GS550
80 CB650 cafe racer
75 PC50 - the one with OHV and pedals...
75 TS100 - being ridden (suicidally) by my fatherComment
-
I ordered a rail from Z1 to see what I can do with it when I pulled the carb apart it had a spacer stuck on one side but do have a good tee and one rail, any suggestion on the corrosion inside where the rails fitComment
-
Just FYI Z1 has the rails and tees that arent specifically made for the GS550e but i miked them out and there are exact fitsComment
Comment