Frequent backfiring at cruising RPM's

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 1983lux

    #1

    Frequent backfiring at cruising RPM's

    Hey Guys,

    I have a friend who drives a '79 GS1000. It tends to backfire a lot at cruising RPM's (3000RPMs) and definitely lacks power. The bike is all stock except for the cheap pod filters he put on it recently. Could these be the cause or is it more likely a timing issue?

    P.S. if putting the stock airbox back in is a good idea, please advise on the easiest way to do this. I helped him take it out and it was a real bitch to do.

    If timing is the way to go, could use a nice video or picture guide on how to do it properly.

    Thanks!
  • Tamara

    #2
    When you changed to pods, did you rejet the carbs?

    Comment

    • slayer61

      #3
      Originally posted by 1983lux
      Hey Guys,

      I have a friend who drives a '79 GS1000. It tends to backfire a lot at cruising RPM's !
      No! It's not me! It's my friend! LOL

      Comment

      • tkent02
        Forum LongTimer
        Past Site Supporter
        • Jan 2006
        • 35571
        • Near South Park

        #4
        Timing is super easy to check, but it's likely the pods causing the problems. Gte decent pods and jet it, set the timing, and adjust the valves since they need it. In fact, catching up all the thirty year neglected maintenance would be a great idea.
        http://img.photobucket.com/albums/v5...tatesMap-1.jpg

        Life is too short to ride an L.

        Comment

        • Nessism
          Forum LongTimer
          GSResource Superstar
          Past Site Supporter
          Super Site Supporter
          • Mar 2006
          • 35787
          • Torrance, CA

          #5
          Read this...http://www.thegsresources.com/_forum...d.php?t=171846
          Ed

          To measure is to know.

          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

          Comment

          Working...