which carb do I have?

[BigGreen]

I have a 1978 gs750. It has wire wheels and a straight seat. I think its just a plain gs750, correct?

I am doing a restoration and It seems the info our there is confusing.
I have a Mikuni carb set that I assume is a VM, but from researching they came in different sizes (MMs). Im pretty sure everything is original. Did Suzuki only use one size?

Thanks

[azr]

You should have a stock set of 26mm VM's. You can always measure the intakes and that will tell you, as well some of them have numbers stamped into them.

[BigGreen]

Thanks alot! This adventure I have embarked on is turning into an obsession!

The bike had been sitting in a garage for awhile. The brakes are toast. I put new plugs in and cleaned the carbs and one kick fired up!

Once it warmed up it started leaking gas from around #3 exhaust ring and from #2 bowl seal (tore when i removed the bowl). I figure a rebuild is in order and wanted to make sure I got the correct gaskets.

[bigskybldr]

Here's a link for your rebuild

http://www.thegsresources.com/garage/docs/vm_carb_rebuild.pdf

Get your o-rings from this guy

http://cycleorings.com/

All my other parts came from these guys
Boulevard Suzuki

[BigGreen]

Awesome! I guess everything really is on this site! Thanks a million