I need a replacement baffle recommendation

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jknappsax
    Forum Sage
    Past Site Supporter
    • Jul 2003
    • 1108
    • Philadelphia, PA

    #1

    I need a replacement baffle recommendation

    I have a 1979 GS 1000 with a unknown brand 4-into-1 with a 4" x 14" can with a 2" pipe. I repacked the baffle when I first got the bike running, but it's still too loud. Agemax had recommended a dB killer that he used, but it seems that while they are readily available in the UK, not so much here. I currently have a straight-through baffle, but think I need something with a cap on the baffle. Anyone have a recommendation and/or source? Thanks.
    1979 GS 1000
  • jknappsax
    Forum Sage
    Past Site Supporter
    • Jul 2003
    • 1108
    • Philadelphia, PA

    #2
    Hello? Anyone?

    The exhaust is supposed to be a Two Brothers, but it's not marked anywhere on it. No thoughts on possibilities?
    1979 GS 1000

    Comment

    • slayer61

      #3
      Supertrapp make a ton of stuff that can be made to fit just about any muffler/silencer. It is tunable based on the number of discs you put in it. Look at their website for accessories.

      Good luck, Paul

      Comment

      • jknappsax
        Forum Sage
        Past Site Supporter
        • Jul 2003
        • 1108
        • Philadelphia, PA

        #4
        Thanks, Paul!

        I appreciate the response. I'll check them out.
        1979 GS 1000

        Comment

        • Guest

          #5
          I have a spare V&H baffle if you can make it work.

          Comment

          • gs11ezrydr
            Forum Mentor
            • Mar 2013
            • 407
            • South Central Kentucky

            #6
            This is the Vance and Hines megaphone street baffle it is also available with a larger outlet size (competition) model. I also have a brand new never ran one like the one pictured I purchased the comp. one when I got the pipe so I never used it. Dealer cost is about 25 bucks.
            sigpic 82 gs1100ez 1168 Wiseco,Web .348 Cams,Falicon Sprockets,Star Racing Ported Head,1mm o/s Stainless Valves,APE Springs,Bronze Guides,etc.APE Billet Tensioner,36CV Carbs,Stage 3 Dynojet,Plenum w/K&N filter,Trued,Welded,Balanced,Crank w/Katana rods & Billet left end, FBG backcut trans, VHR HD Clutch basket,APE nut,VHR High volume oil pump gears,1150 Oil cooler,V&H Megaphone header w/Competition baffle,Dyna S,Coils,Wires,etc.Other misc.mods.

            Comment

            Working...