Are carburetor kit help please

[suzukilover]

ARE CARBURETOR KITS For a 1981 suzuki gs850 g the same as on the gs 1100. i have a suzuki gs850 and i need a carb kit for all for but the only bundel packs are for 1100 are they compatable with the gs 850

[GateKeeper]

why do you need a carb kit, most are junk and not worth much....

strip the carbs, dunk the carbs, put in new O rings, and your good to go....if anything get new fuel bowl gaskets....

o rings you get here

www.cycleorings.com

.

[tkent02]

Look for carburetor information here:

http://members.dslextreme.com/users/bikecliff/

[leedutcher]

Don't forget new float valves. Most the time it they sit they tend to stick. So.orings float valves and bowl.gaskets are all that really needed...unless the p/o got in there and destroyed it.

Here is a kit kinda pricy but has everything http://item.mobileweb.ebay.com/viewi...d=111126807091

[tkent02]

Those K&L kits are the ones to avoid. A good cleaning will fix the float valves unless they are actually worn, or unless the little spring is shot. Removing the valve with pliers smashes them just a little bit out of round and can make them stick.

[Guest]

Don't forget new float valves. Most the time it they sit they tend to stick. So.orings float valves and bowl.gaskets are all that really needed...unless the p/o got in there and destroyed it.

Here is a kit kinda pricy but has everything http://item.mobileweb.ebay.com/viewi...d=111126807091

Those kits are junk. Just get the new orings from Mr. Barr and take the carbs apart and dip and clean properly. You can get bowl gaskets if you want but 80% of the time you dont need to, or needle float valves, just clean them well. If you follow the advice of this site you will be okay. This site has probably cleaned a 10,000 carbs successfully with out carb kits

[Guest]

If you need Mikuni parts let me know.

[gustovh]

Bill, I still need a set of 225 jets.
V

[Guest]

bill, i still need a set of 225 jets.
V

225?
.........