.png "Powered by vBulletin")
Title says it. I'm looking for a set of O Rings for my BDST36SS CV Mikunis. I hate the thought of going to the dealer and picking them out off of the fiche. I'm just wondering if anyone has seen a rebuild set already gathered and from where. The rack is off of a 97 Rf900.
-
-
Robert Barr has the oring kits & is a member here. Ray. -
True, but he only carries pre-made kits for the VM and BS series carbs that are used on the GSes.Originally posted by rapidray View Post
However, if they are the same o-rings, ...
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
Measure the O rings and go see the local O ring oracle… They can't be anything too unusual.
Life is too short to ride an L.Comment
-
I have K and L rubber o rings for the mixture screws and the float seat. of most all mikuni bs/rs/ most all keihin tooSUZUKI , There is no substituteComment
-
I'd be interested in a set of both of those. The rest? Here is a good read that shows a rebuild of the BDST36ss carbs,http://www.gixxer.com/forums/showthread.php?t=159718 it might give a little insight into what else is needed.Originally posted by trippivot View PostComment
Comment