Where can I get the part that screws into the underside of the carb to head boot to synch my vm26's?
-
-Mark
Boston, MA
Suck Squeeze Bang Blow..
sigpic
1980 GS850G with 79 carbs..... -
Hardware store, if you are creative. I threaded some brass tubing a few years ago, with a nut and an O ring it works great. -
Bolts with holes drilled through the centre of them.
As Tkent02 said, be creative. Z1 if you don't care to be.Comment
-
What are you using for a gauge (set)?
It should have come with adapters, but just in case it didn't, click HERE.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
thanks guys, thats what I'm looking for Steve, thank you!-Mark
Boston, MA
Suck Squeeze Bang Blow..
sigpic
1980 GS850G with 79 carbs.....Comment
-
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
I made my threaded tubes in about eight different lengths, it is very handy for threading into the ports on different sized bikes. Why they put the ports on the underside I'll never know.Comment
-
I just found in the drawer at work, fittings I've used a million times.... they are SMC Elbows, M5 thread on one end, push to connect 4mm tube at the other end....I think I will use those! Uggg....-Mark
Boston, MA
Suck Squeeze Bang Blow..
sigpic
1980 GS850G with 79 carbs.....Comment
Comment